Bs5 to B9

7 replies
Gents,

I've got the bm5/bs5 connected to a bv9 as the dtv.

I can get the bm5 screen but cannot control it.

I've tried it with a 3.5mm cable connected to the control of bv9 and ir of bm5 and with no 3.5 mm cable.

Any thoughts?

Thanks
Hello mjmedio,

I think that bm/bs is cabled with ML to the BV9 ??

Try to connect the bs/bm as "pc" .....

it should work ;-)

Niederrheiner
I have it connected to my ML network.

I cannot get any control over it? Does it respond to PC commands over the network ?
To further the dialogue.

My bv9 shows the PC as av5 but it is grayed out.
Normally you can control it by N.Radio/N.Music over ML

And it accept PC commands over ML-Networks

Why is PC grey?? Used by another ??

Niederrheiner

Did you connect it's video via  hdmi ? This will not work ...
you should connect the BM5 via the VGA input and not via the hdmi.
The BS3 detects it is a BV9, so it assumes a BM1 is build in in the system, connected via VGA...
if the ML cable is connected it should work when you select PC 
you do not need a IR input on the BM5

 

regards

 

nico 

Sounds like your BV9 has a built in beomedia 1. This needs to be removed or disabled before you can control the BS5
or
BeoWorld Gold Membership card
Join BeoWorld

Register to access the forums, reference material, and exclusive member benefits — including our monthly prize draw.

Become a Member

December 2026 Prize Draw

Gold Members Only

As a Gold member you're automatically entered into our exclusive prize draw — your chance to win iconic Bang & Olufsen products. A unique benefit of BeoWorld Gold membership, every draw brings a new opportunity to win something special.