maybe a reset would help you out?! Sometimes software does not respond in the way is was expected; often the "best" try is to shut down the whole thing and let it restart - sorry but I don't have any other idea (cause as you wrote that the system had enough time...

regards elmar

Well - I have restarted the system several times now. So yeah - have tried that :) but thx for the respond!

Had a quick dig round known faults - one is the disc is full. What software are you running at present?

Hi Peter, thank you for participating in helping me solve this issue!

Current BM5/BS5 application version is: 6.02.00.1902

Current BS5 main firmware is: 1.33a

Current BS5 boot firmware is: 0.04a

FYI: The disc is far far far from full !...

Btw: Manually software upgrade just responded "Failed"

Hope this helps! Thank you very much again for participating - hope we can find a solution for me! :(

Had a look at the info I have and all it states is that there are errors in the software that they are working on! And the work around is to download the new software!!!! I think this is one for Keith or a dealer!

Thank you - but who is Keith? :)

BeoWorldMan wrote:

Thank you - but who is Keith? :)

Keith Saunders is the webmeister of this site => 

How reliable is your connection to the internet?  If this is not reliable, then this too could cause issues upgrading the software.

If your network is reliable, you might also try restoring your system to a previous version (go into the extended menu <<, >>, <<, >>, GO) and find system restore.  This will take a while.  When this finishes, try the software upgrade again.

These steps fixed mine (and a few others on the forum) when B&O mistakenly released some software before it had been completely cooked.

Stan