Beo 6 and Samsung TV + Technisat Receiver

18 replies
R(
Offline
romazzino (archived)
Bronze
Posted January 3, 2012 at 07:03 GMT
#1782683

Hello,

this is my first post, so hello everybody and thanks for all the informations here!

I am trying to configure my beo6 remote, but i am struggeling with the 3rd party products. I would like it to work with my samsung le 40a656 tv and technisat digit isio receiver in the living room. Also if possible with apple TV and really optional would be an old Sony A/V receiver. My B&O system in the living room is a beosound 3000 w/ beolab 6000 speakers.

I assume that the Samsung TV file from a previous post here somewhere works fine with my TV but my real problem is the technisat receiver. I have found some sort of codes on the lintronic site for the digit isio (under supported products), but I am not sure how to proceed from here on...

unfortunately I do not own any equipment to read codes from the remote directly.

 

I was hoping someone could maybe explain me how to convert these codes on the lintronic site, or maybe there is even a easier way? Thank you,

 

Martin.

BE
Offline
BeoIce
BronzeFounder
Posted January 3, 2012 at 09:03 GMT
#1782684

Hi and welcome to Beoworld,

I'm sorry, I can't give you any information on how to convert these codes, but Keith Saunders our Beo5/6 XML master can help you with that.

I think he will be there soon 👍

Regards

Martin

R(
Offline
romazzino (archived)
Bronze
Posted January 3, 2012 at 10:03 GMT
#1782685

Hi & thank you 🙂

 

No problem at all, I'm sure it will take some time to get the Beo6 perfect, so I'm not in a hurry ;) I've seen on the FAQ page and on the Beo5 page that Keith is probably the man for this ;) I just hope it's not too bothered by a beginner like me :D

 

Regards,

 

Martin.

Keith Saunders
Offline
Keith Saunders
BronzeFounder
Posted January 3, 2012 at 14:46 GMT
#1782686

Martin,

A Very Warm Welcome to Beoworld..

Controlling third party products that you have listed is not a problem, but you need to understand some of the limitations of the B&O Configuration Tool when it comes when trying to make changes to third party products. For this reason ALL 3rd party XML configuration files I produce will have hardkeys and digits and any other required elements pre-assigned, then it is just drag-n-drop within the Configuration Tool.

Lets start with the easy requirement you have and that is the Apple TV, you can download an Apple TV XML file link which is contained within a ZIP file. Extract the ZIP file to C:\ and it will automatically place the XML file into the correct directory of the B&O Configuration Tool.

In the Configuration Tool click on PRODUCTS then the tab marked OTHER and you will see Apple TV and you can just drag it into your configuration.

Once you have tested it, let me know how you get on and then we can look at your next product.

Location: Hampshire, England

R(
Offline
romazzino (archived)
Bronze
Posted January 3, 2012 at 16:10 GMT
#1782687

Hi Keith,

 

Thank you for the welcome and your help! 😐

AppleTV and the Samsung TV are working now! Although the Samsung file doesn't seem to support all the functions... but it's more than good enough for the time being! I guess the Technisat won't be as simple, or is it?

 

Thank you again, cheers Martin!

Keith Saunders
Offline
Keith Saunders
BronzeFounder
Posted January 3, 2012 at 16:46 GMT
#1782688

OK Martin..

What is the model number of the Technisat ?

We need to determine what protocol is used which I think is likely to be Philips RC6 protocol which is complex, but can be done.

Location: Hampshire, England

R(
Offline
romazzino (archived)
Bronze
Posted January 3, 2012 at 17:26 GMT
#1782689

it is the Technisat digit isio s1!

Keith Saunders
Offline
Keith Saunders
BronzeFounder
Posted January 4, 2012 at 03:09 GMT
#1782690

Martin,

My research appears to show that this device uses Philips RC5 protocol (Carrier Frequency 36 Khz) and uses a device address of decimal 08

Is the following remote the one with your unit ?

Location: Hampshire, England

Keith Saunders
Offline
Keith Saunders
BronzeFounder
Posted January 4, 2012 at 03:16 GMT
#1782691

Martin,

With regards to your 4th requirement, the Sony AV Receiver, you may wish to try the XML file

Location: Hampshire, England

R(
Offline
romazzino (archived)
Bronze
Posted January 4, 2012 at 05:20 GMT
#1782692

this is exactly the remote i use. i will try the sony xml meanwhile. i found these codes on the lintronic site which may be useful:

 

705 008 000 000 014 000 000 0
705 008 001 000 014 000 000 1
705 008 003 000 014 000 000 3
705 008 004 000 014 000 000 4
705 008 005 000 014 000 000 5
705 008 006 000 014 000 000 6
705 008 007 000 014 000 000 7
705 008 008 000 014 000 000 8
705 008 009 000 014 000 000 9
705 008 034 000 014 000 000 back
705 008 110 000 014 000 000 blue
705 008 033 000 014 000 000 channel down
705 008 032 000 014 000 000 channel up
705 008 121 000 014 000 000 display
705 008 081 000 014 000 000 down
705 008 052 000 014 000 000 fast forward
705 008 108 000 014 000 000 green
705 008 079 000 014 000 000 info_vor
705 008 085 000 014 000 000 left
705 008 082 000 014 000 000 menu
705 008 013 000 014 000 000 mute
705 008 105 000 014 000 000 nav
705 008 116 000 014 000 000 next
705 008 087 000 014 000 000 ok
705 008 010 000 014 000 000 opt
705 008 088 000 014 000 000 pip
705 008 053 000 014 000 000 play
705 008 012 000 014 000 000 power
705 008 055 000 014 000 000 record
705 008 107 000 014 000 000 red
705 008 050 000 014 000 000 rewind
705 008 086 000 014 000 000 right
705 008 047 000 014 000 000 sfi
705 008 038 000 014 000 000 sleep
705 008 041 000 014 000 000 still
705 008 054 000 014 000 000 stop
705 008 060 000 014 000 000 text
705 008 106 000 014 000 000 timer
705 008 035 000 014 000 000 ton_sound
705 008 083 000 014 000 000 tv_radio
705 008 080 000 014 000 000 up
705 008 017 000 014 000 000 volume down
705 008 016 000 014 000 000 volume up
705 008 127 000 014 000 000 www
705 008 109 000 014 000 000 yellow
705 008 126 000 014 000 000

zoom

or
BeoWorld Gold Membership card
Join BeoWorld

Register to access the forums, reference material, and exclusive member benefits — including our monthly prize draw.

Become a Member

December 2026 Prize Draw

Gold Members Only

As a Gold member you're automatically entered into our exclusive prize draw — your chance to win iconic Bang & Olufsen products. A unique benefit of BeoWorld Gold membership, every draw brings a new opportunity to win something special.

View Prize Go For Gold