BeoWorld Bang & Olufsen Forum

What can I do about this?  I noticed that behind the sticker on the bottom there is a small oval hole with two solder points.  Test posts?  Manual reset?  I noticed something similar on the handset once the battery cover is removed.  To the right there are two small holes with what looks like a place to insert probes to ...

Jeg har to 1.-generations (Mark I) Beocom 6000 telefoner, hvor jeg formoder, at printpladerne er røget sig en tur. De vil ikke tilmelde sig en base. Jeg har andre telefoner, som sagtens kan tilmelde sig basen, og der er også plads nok på basen til nye telefoner...... Jeg har hørt noget om, at man kan bestelle et ...

Hi, I have problems connecting two used Beocom 6000 handsets to the Beocom 6000 base. I have followed the instructions from the manual, and I can also get a third handset connected. Batteries are OK, and there are space enough on the Beocom 6000 base for additional handsets (only 1 phone is connected at the moment). Any ideas what is wrong? I ...

Hi there, I'm new around here and I'm hoping someone can help with a problem I'm having with my BeoCom 6000 system. I know there are some similar posts on here already, but I thought I'd give all the info about my specific situation. I have had a system with two handsets working fine for five or six years with a connection to a ...

Hi everyone, I only joined Beoworld this last February and couldn't believe my luck when i had found out i had won a 2nd prize in one of the prize draws! I won a B&O BeoCom 6000 phone!!!! I have not had the opportunity or spare cash to buy myself a B&O toy, but have looked and played adoringly with all the gadgets in their ...

Hej allesammen  Ville lige høre jer om der er nogle der ved hvordan man kan få liv i sin telefon igen? Jeg sad og leget med min beocom 6000 og så fik jeg afmeldt den fra basen, og nu siger basen at den vil have en pinkode, og den kan jeg ikke huske...  Jeg har prøvet med de : 0000 men det virker ikke, der ...

Hello Keith   Follow up question on difference in chargers and related voltages. So MKI charger/base station ( Beocom 6000) uses a 7.5V adapter and will only fit a MKI Beocom 6000 handset A MKII charger ( Beocom 1 in US, Beocom 6000 MK II in Europe) uses a 5.6V adapter. It will fit both a MKI and MKII handset.   Now the ...

Does anyone know the latest version of the  (US) Beocom 6000 firmware?  I have 001-1.63 for handset and 1.50 for the base.  Thanks. -- Paul 

Hello, Puzzled  by the various rules and restrictions on what can pair/connect with what I started a what I call compatibility matrix. The FAQ on this topic is a very good start but still leaves a few holes. I have not taken into account the compatibility between the different country versions, that might well be the next step. I would ...

Hello,  I'm not sure when but I noticed the change in name 6000 to 1. Is this just a name change or did the features and functions change too. More important the pstn base that comes with the current beocom 2, can (US) beocom 6000 handsets of about 5 years old connect to them?  Regards Peter 

What cables are you using to connect the pstn unit to the telephone connection. BT in its wisdom have chosen  their own standard on socket wiring, which is very different from the rest of the world! Bless BT The rj11 connector used by BT have the 2 phone wires connected to outside pins, pin 1 and 4 and the earth and bell signal to the two ...

Hello Keith,   Thanks very much for the quick and extensive reply. The Caller ID function seems to work fine, for both the 1200 answer machine and the phones. (Both US versions). By "updated Mark I', do you means a fw updated or does it also need an update of hardware components? If so what are the costs for that? How can I see ...

Hello I have 3 beoline 6000 mk1 handsets: 1 x fw version 001-1.60 0103071019-2G4 2 x fw version 001-1.40 9912030929-2g4 I use them in the UK, the sets are from the US. I have seen fw version 2.x been mentioned in forums. A couple questions, it is worthwhile to get them upgraded and is it possible and needed to get them ...

Hello, I have 5 old Sonos units from the old house but I am now determinedly moving the new house project towards B&O. I am in the process of changing all the TV’s and Speakers but keep the Sonos units till last to tide me over till the ‘Beomaster 5’ comes out. I will state with 2 rooms with Beolab 8000s and on media room ...

Hello all  I am new to Beoworld and was hoping for some advice.  I recently purchased a Beocom2 phone and the chocolate bar connection to the phone line. My in laws gave me 2 beocom 6000 phones (quite old - 5 years approx.). I can get one of the phones to register to the base unit but they will not pick up the adddress book etc. ...