Browse Forum Posts by Tags
Showing related tags and posts for the
all tags in the site
Beogram 3000 not working
beogram 4500 arm problem
Beogram Tonearm Hanging Too Low
tangential arm issues
tonearm not raising dragging needle beogram 4004 4002
Beogram 8000 vibrating tonearm & general upgrading
Normal 0 false false false EN-AU X-NONE X-NONE Hello all, I recently upgraded the delaminating tacho disk and all caps on my imported BG8000 (thanks to the replacement packs from Dillen). I now find after the toil that these were not the only issues. When the tonearm slides along the back of the platter...
on Tue, Apr 10 2012
Filed under: tonearm, problem, Beogram 8000
Beogram 4000/6000 cartridge conversion?
Following advice on here approaching 12 months ago regarding setup issues with my 6000 (I've searched but failed to find the original thread!), I've since managed to seek out a specialist that has given the deck an overhaul. As well as the usual tonearm raising/lowering problems, one of the internal...
on Fri, Mar 30 2012
Filed under: tonearm
Anyone in the UK who can service/overhaul a Beogram 4000 ?
I have a Bang & Olufsen Beogram 4000 which is in need of some work. The arms moves across but doesn't drop down on to the record. I had this issue fixed before but as soon as I changed from 33 to 45 to play a single, it went wrong again and now the arm wont drop. I have tried some of the tips...
on Sun, Jul 22 2012
Filed under: tonearm, beogram 4000
antiskate, or something else... (BG5000)
I'm trying to adjust the anti-skate on a BeoGram 5000 I picked up (radial arm, like the RX2 has). In spite of the antiskate screw (on the underside) set properly for a MMC4 cartridge, it was too strong to the point of distorting the sound, with the cantilever visibly skewing toward the hub. Opening...
on Fri, Sep 14 2012
Filed under: tonearm, radial
Beogram 4002 tonearm always lowers at 12"
I have a Beogram 4002 that works perfect except for the fact that the tonearm always lowers at the beginning of the turning platter, even when no record is present. This is fine for 12" records but when playing 7" or 10" records I always have to manually direct the tonearm to the right...
on Wed, Oct 31 2012
Filed under: tonearm, problem, tangential, beogram 4002
Beogram 8002 - tonearm is not progressing inward
I got my Beogram 8002 back after weeks at the local repairing shop. He fixed the problem (he said) and surely the arm is now lowering at the right place according to what kind of record is on. But after some seconds the arm jumps, and is unable to move inwards. Is it possible for me to fix that? Or is...
on Wed, Nov 28 2012
Filed under: tonearm, Beogram 8000, tangential, 8002
Beogram 2400 tonearm issues
I just acquired a Beogram 2400 (flat front, controls under dust cover) and there appear to be several related, if not one large, issue(s) regarding starting record playback. When I press the 33 button, the platter spins, the tonearm drags itself across the aluminum plate, hits the edge of the platter...
on Sat, Feb 16 2013
Filed under: tonearm, problem, lift, beogram, Beogram 2400, controls
Re: Beogram 5500 won't turn on
Hi Menahem Just saw your response re. tangential-tracking arm issue on Beogram 5500. In my case, the Play function works, the arm goes up and down and plays the record properly. However, the cartridge does not slide anymore, ultimately leading the reading to stop. I am kind of scared to carry out your...
on Thu, Jun 27 2013
Filed under: tonearm, Beogram 5500, tangential, tangential arm issues, Beogram 5500
Beogram 3300 - Arm lowering differently at the beginning and at the end
Dear Community, Here is the situation on a 1986 Beogram 3300 deck: The arm lowers when I press "play", except that at the beginning of the disc, the diamond doesnt touch the disc (3 mm too high), and at the end of the disc, the cartridge is very close to the disc, the stylus suspension looks...
on Fri, Mar 21 2014
Filed under: tonearm, tangential arm issues, Beogram 3000, Beogram 3000 not working, beogram 3300
Beogram 4004 Slow Tone Arm Tracking
Hello all, my first post in this forum, but today I came home with a beautiful condition Beogram 4004. However, I noticed after hooking it up that the tone arm moves at a snails paces when starting and stoping. It also seems to shudder halfway through its journey when its returning after it reached the...
on Sat, Apr 5 2014
Filed under: tonearm, 4004 Beogram, slow, speed, tracking
Page 1 of 3 (24 items) 1