Sign in   |  Join   |  Help
All Tags » repair (RSS)
Click here to tell us about your new email address

Browse Forum Posts by Tags

Showing related tags and posts for the Vintage Products forum. See all tags in the site
  • Beomaster 2000

    Hello all! I'm a total newbie to the Beoworld - have loved the classic design of B & O for years and finally took the plunge and bought a Beomaster 2000 (80's version), Beogram 2000 and Beovox RL35 speakers. I'm hoping the knowledgeable people on this forum might be able to point me in...
    Posted to Vintage Products (Forum) by ojb on Thu, Sep 13 2012
    Filed under: Beogram 2000, repair, Beomaster 2000, help
  • BEOGRAM 6500 turntable / tonearm not moving

    Dear I have received a BEOGRAM 6500 turntable as a gift from my neighbour who did not use in several years.Cosmetically is in mint condition but the problem is that the tonearm does not move.The table is rotating and the light comes on , even the tonearm lowers but goes up after three seconds but it...
    Posted to Vintage Products (Forum) by martiniq on Mon, Sep 24 2012
    Filed under: Phono, repair
  • Repair / replace potentiometers (sliders) Beomaster 1900

    Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 I need to replace or repair the balance control slider on my Beomaster 1900 (which I have had since new in 1976). Can anyone advise on - - where I might buy one - the challenge of repairing the worn surface (the slider is not in...
    Posted to Vintage Products (Forum) by neilmacindoe on Tue, Oct 2 2012
    Filed under: beomaster 1900, repair, slider potentiometer
  • Beocenter 2800 - Pickup arm wont "land" on record

    Hello! First of all, im new to Beosystems and this forum. I have searched this forum for related threads, but I can't seem to find anything that helps. If there is a related thread, please post a link? My beosystem 2800 seems to be in perfect contdition, except the pickup arm won't land on the...
    Posted to Vintage Products (Forum) by Danslon on Wed, Oct 10 2012
    Filed under: repair, Beocenter, 2800, pickup arm
  • Beogram 4004 help with output cable.

    Hi Everyone, Just wanted to ask a question, I have just brought beogram 4004 record deck its in mint condition but at some point during its life its had the 5 pin din connector cut off and has had photo plugs put on it with a connector block to the metal cable that runs through the cable. I have the...
    Posted to Vintage Products (Forum) by Lewis T on Fri, Oct 12 2012
    Filed under: 1970's Record Player Beocenter 1600 Beovox S30 Beogram 1203 SP14 Stylus Mono Stereo Left Right, repair, help, beogram 4004
  • Beomaster 8000 right channel went up in smoke, what to do next?

    Hey guys, My first post here at beoworld. My parents had an old Beomaster 8000 set in the garage (beomaster, beocord, beogram and beovox ms150) which has been unused for 8 years or so. We brought the set back to life two days ago. All the devices have their problems, but the beomaster was working ok...
    Posted to Vintage Products (Forum) by BeoMaster4 on Sun, Oct 21 2012
    Filed under: repair, BeoMaster 8000, right channel, failure
  • Beomaster 901Issues

    Hi Everyone, I have just recently brought a beomaster 901 and was sold it in fully working order. I have powered it up with some beovox 901 speakers not the best speakers in the world. When you have it switched on but no function selected and the volume is up it sounds like white noise coming from the...
    Posted to Vintage Products (Forum) by Lewis T on Mon, Dec 3 2012
    Filed under: Beovox, beomaster 901, repair, help, right channel, problem, muffled sound, vintage, 901, beomaster.
  • Beogram 1102 refurb - how to remove flywheel?

    Hi everyone, I know this might seem like a very basic question but how do you remove the flywheel on a Beogram 1102? I've removed the platter but can't seem to lift the flywheel off and wondered if there are any fixings I need to remove first? I'm very new to all this so you'l have to...
    Posted to Vintage Products (Forum) by richardbell81 on Tue, Feb 12 2013
    Filed under: repair, 1102, beogram, refurb, spares
  • Two defective Beomaster 1900s

    Hi there, first post here! A while ago I have bought myself a Beomaster 1900. Having not tested it myself I found that when it arrived it was, of course, broken (looking at this forum this happens more often :). Originally the left speaker channel didn't work, and most of the lamps were out. Upon...
    Posted to Vintage Products (Forum) by Mkickert on Tue, Feb 26 2013
    Filed under: beomaster 1900, repair, failure, vintage, beomaster., Hum, refurb, broken
  • Beomaster 6000 Type 2702 (4-Channel) - Repair/Restoration Advice!

    Hi there, i got lucky and bought two Beomster 6000 4-Channel Tuner. They were both sold as non working but after opening them I quickly figured that they are easy to repair. I almost got them fully working again and only have a few Questions where I need your support. 1. The belts for the Volume / Balance...
    Posted to Vintage Products (Forum) by BataIllic on Fri, Mar 8 2013
    Filed under: repair, vintage, beomaster 6000 type 2702, 4 channel
Page 1 of 4 (33 items) 1 2 3 4 Next >