Sign in   |  Join   |  Help
All Tags » fuses (RSS)
Click here to tell us about your new email address

Browse Forum Posts by Tags

Showing related tags and posts for the The Workbench forum. See all tags in the site
  • Beocenter 7002 - Amplifier problem

    Hi all I have some problems repairing my Beocenter 7002 amplifier; main fuses burned. One channel is good, the other needs the replacement of IC200/Ic201 and 0,36 ohm resistor. With this solution the IC began to be hot at 2 volts (2 of 30V); so replaced all the transistors and diode (step by step). Actually...
    Posted to The Workbench (Forum) by Eugenio on Fri, Jan 18 2013
    Filed under: amplifiers, Becenter, fuses
  • Beomaster 5500 T4a fuse blows every time power is connected

    hi ... I have no electrical engineering knowledge... i have a multimeter but v.little idea how to use it.. so now you know what your up against! Therapeutic as it is watching the fuse blow i figured it wasn't worth sacrificing a 3rd one to watch it go up in an orange flash.... so i need help understanding...
    Posted to The Workbench (Forum) by dan1969 on Sat, Apr 27 2013
    Filed under: beomaster 5500, internal fuse, blown, fuses, dillen beomaster 5500 t4a fuse
  • MPAV 9000 repair

    Hello Members, i just bought a second hand, sadly ruined MPAV 9000. No sliding doors, missing lower pulley mechanism, and - the main problem - no power. I opened up the unit, and the main pcb (power supply, with masterlink, aerial connectors ) has some physical damage. The secondary side fuse F6 is toast...
    Posted to The Workbench (Forum) by widerstand on Fri, Feb 21 2014
    Filed under: fuses, fix, MPAV 9000
  • Beomaster 2000 type 2801, 1.6A fuse (F101) keeps blowing:

    Hello all, I'm the happy owner of a white Beomaster 2000 type 2801, which unfortunately has begun acting up recently. the F101 fuse keeps blowing and I subsequently only get sound out of the right side speaker outlets. I'm not particularly knowledgeable about these things, but could the fact...
    Posted to The Workbench (Forum) by mtjonn on Tue, Nov 24 2015
    Filed under: blown, fuses, type 2801, Beomaster 2000
  • New member : Beocenter 7000 tape mechanism question.

    Firstly I apologise if this issue has been previously discussed a million times. I recently purchased a Beocenter 7000 and was frankly amazed considering the price I paid at how well everything worked, including the cassette player. But not for long, soon after the tape mechanism stopped altogether....
    Posted to The Workbench (Forum) by Andy1687 on Wed, Feb 10 2016
    Filed under: fuses, tape belt, Beocenter 7000
  • Re: Beolab 8000 no sound

    I guess if there is foam rot short circuiting the IC board and solder post deterioration, it is a matter of whether you want to drag one speaker at a time for repair, or get them both done and over with. I chose the latter, better to be safe than sorry and sitting and listening to your just fixed speaker...
    Posted to The Workbench (Forum) by larseny on Mon, Jul 3 2017
    Filed under: internal fuse, Beolab 8000, Repair, fuses, capacitors, Circuit boards, Beolab 5000
Page 1 of 1 (6 items)