Browse Forum Posts by Tags
Showing related tags and posts for the
all tags in the site
cartridge vintage B&O_350
master Control Pannel
Master Control Pannel 5000
pick up arm
Beogram 1102 refurb - how to remove flywheel?
Hi everyone, I know this might seem like a very basic question but how do you remove the flywheel on a Beogram 1102? I've removed the platter but can't seem to lift the flywheel off and wondered if there are any fixings I need to remove first? I'm very new to all this so you'l have to...
on Tue, Feb 12 2013
Filed under: repair, 1102, beogram, refurb, spares
Beogram 1102 - un-even rotation and white 'rust' marks on pick up arm
Hello, I've recently bought a Beogram 1102 and have a couple of questions to ask the experts! This is my first B&O system which i'm just trying to fine tune and wondered if anyone had any experience of the following and any suggestions! 1. Firstly the turntable seems to rotate un-evenly and...
on Thu, Feb 7 2013
Filed under: un-even, 1102, beogram, pick up arm
Can I use the Master Control 5000 with my beomaster 5000 and beogram 5500?
He guys! Quick question before I go on a bidding spree on E-bay: I have a beogram 5000 hooked up on a beomaster 5500 Can I use the master control 5000 to control both systems? Also, is it possible to buy a master control 5500 to use on the beomaster 5000? The MC 5500 seems to be better. Thanks for the...
on Fri, Sep 27 2013
Filed under: 5500, beogram, 5000, beomaster, Master Control Pannel 5000, master Control Pannel
BEOGRAM 9500 / MMC-2 broken
Hi everyone, My Beogram 9500 is out of order : the MMC-2 cartridge is broken. As it is quite impossible to find a new MMC2 cartridge for a reasonable price, is it possible to use another model of cartridge? MMC4 or 5 for example? Thanks in advance for your answers, Marc
on Tue, Sep 3 2013
Filed under: cartridge, repair, vintage, Cartridge Vinage, cartridge vintage B&O_350, catridge, beogram, broken, turntable
Beogram 1102 - needs re lubricating?
Hi Everyone, I have just got myself a beogram 1102, its in ok condition, have put a mmc20s on it and a belt. It appears that when I am playing a record the arm isn't going down properly because you can hear the needle is not in the groove on the record its starts to sound all distorted and horrible...
on Thu, Mar 20 2014
Filed under: repair, help, vintage, beogram, motor, arm, beogram 1102, speed
Re: Beomaster 900K
Yeah thanks for the advice. I feel that 70-80 euros was too much to pay for the functioning one I bought as it is. Unfortunately it's the tyranny of distance for us down under because the freight costs are always very expensive and then, unless the items are packaged extremely well they tend to arrive...
on Mon, Mar 31 2014
Filed under: Beomaster 2000, beogram, 900K, Beocord, beomaster 3400
Beogram RX2 Troubleshooting
I recently purchased a Beogram RX2 in near mint condition. Problem is that it’s only playing out of the right channel. I’ve checked the cartridge (MMC4) which looks to be in near mint condition also. I turned it upside down and ran the player. I then used a soft artist brush to gently brush...
on Thu, Feb 12 2015
Filed under: beogram, Rx2
My Beogram 4002's transformer is bit noisy
Hello everyone, A year ago I found a beogram 4002 in bad shape, I got it repaired by a pro, a vintage hifi specialist and he got it working again. But since then there is a sort of vibration noise I can hear as soon as the turntable is plugged in. It appears to come from the transformer, while opening...
on Sun, Jan 25 2015
Filed under: repair, beogram, Transformer
Vintage kit advice
Hi all, My folks have had some B&O kit sitting unused for a while, and have asked me to look at refurbishing and moving it on to anyone that's interested. I was wondering what your advice would be on the matter. All the kit is in fine order, and I just need to check operation of it, such as the...
on Sun, Nov 29 2015
Filed under: Beovox, beogram, beomaster, trumpet
7 pin DIN switching box
HEY, Does anybody know if it would be possible to create (or buy) a seven pin DIN switch box so I can expand the number of B&O inputs that can be controlled by my Beomaster 3300 Thanks, J
on Sun, May 31 2015
Filed under: beogram, DIN
Page 1 of 1 (10 items)