Casdave, First, thanks for your suggestions, I will certenly check - and remplacer if needed. This is really interesting. What was the final result of your restoration ? /Frede

I don’t remove any wires at this stage. I only pace the filter at the top of the cabinet and do the work here. I suggest using some protection between the filter and your Beovox 5000. The process require a few changes to the filter because the new caps are physical much bigger and more heavy. I...

Replace the capacitors in the crossover network Bipolar capacitors produced for more than 50 years ago are dried out and need replacement. I will replace the capacitors with some (expensive) MKT film capacitors (metallised polyester film) I am using some from Bennic and Monacor Here you can see the old...

I have started to upgrade my Beovox 5000 MKIII designed for Beolab 5000 (1967-1972). I am planning the following: Replace the capacitors in the crossover network Replace the internal wiring to the bass driver Replace the external cable Coat the cones of the midtone- and bass drivers /Frede

I found this lamp designed by Hans Haugaard and Niels Esmann (or should we say re-designed ;) The link: http://www.lite-house.dk/shop/knob-bordlampe-230v-6204p.html Some of us saw this design allready in 1967 /Frede

Hej alle, vores (åbenbart lidt ubehændig) rengøringshjælp har slået betjeningspanel til min elskede Beocenter 9300 i stykker... Er der nogen som har en bud hvor jeg kan få en ny eller (helst) brugt til en rimelig pris? Helge

...and the Beomaster 5000

I did not 'see' this first 2007 type, tks for pointing it out for me and tks for you input. Yes of course you can see the tables with the latest registrations.

[quote user="Spanner"] Thought I'd give you my serial numbers as a first post. Beolab 5000, type 5303, serie 02, No 65395 Beomaster 5000, type 2005, serie 01, No 15492 They are both just gathering dust at the moment, along with a Beogram 1000. The beomaster and Beogram were completely dead...

I have sent you an email /Frede