Sign in   |  Join   |  Help
Click here to tell us about your new email address

Browse Forum Posts by Tags

Showing related tags and posts for the Vintage Products forum. See all tags in the site
  • BM 3500 service menu access

    Hello, I believe there is a service menu which have been set up in the Beomaster 3500. How to access this service menu is my question, the first reason is to know the sw release version. In addition to this sw release version, what other info would be available or changed? Thanks a lot for the information...
    Posted to Vintage Products (Forum) by Traverso on Thu, Nov 7 2013
    Filed under: Beomaster 3500
  • Beomaster 3500 Frequency display shift

    Hello, Can someone advise me about the following. When using the FM tuner section of the Beomaster 3500 there is a fixed shift between the actual radio frequency and the value I have to display on the Beomaster 3500. This fixed shift is 0.4 Mhz and is always to be added to the actual frequency. Example...
    Posted to Vintage Products (Forum) by Traverso on Thu, Nov 14 2013
    Filed under: Beomaster 3500
  • Re: Beomaster 3500 Frequency display shift

    It worked fine and the programmation remains as long as I do not plug out the BM 3500. It happened I changed the location of the BM 3500 I have to plug out and in from and to the mains socket. And then everything lost I have to reprogram again the frequency shift and the different channels. Is there...
    Posted to Vintage Products (Forum) by Traverso on Thu, Nov 28 2013
    Filed under: Beomaster 3500
  • Re: Beomaster 3500 Frequency display shift

    The battery was changed, I measured it before it was down 1V against 3V normally. Also, I put it on a support, soldered in place of the battery, it fits exactly the holes. Therefore I used a battery without soldering pins, more easy to find. Next time it will be just a matter of swapping. By the way...
    Posted to Vintage Products (Forum) by Traverso on Thu, Dec 5 2013
    Filed under: Beomaster 3500
  • Timer function programmation Beomaster 3500/4500

    Hello, Thanks to efforts provided by Leslie, we could upgrade my BM 3500 to the SW release 2.2 and now the timer function is present as one programming possibility. Here i have the following questions. Firstly: is it possible to program the timer directly on the keyboard of the Beomaster? How to do it...
    Posted to Vintage Products (Forum) by Traverso on Mon, Jan 13 2014
    Filed under: Beomaster 3500
  • Beomaster 1900 or 3500 - any recommendations?

    Hi folks - I´m up with the choice of buying a 1900 or 3500, interested to hear if anyone has a viewpoint or recommendation? They´re going for about 50€ each, I believe each in good working order. I´ve read everything I can about each of them, but still not quite clear which one...
    Posted to Vintage Products (Forum) by nataniel on Thu, Feb 19 2015
    Filed under: beomaster 1900, Beomaster 3500
  • Re: Beomaster 4500 RIAA phono preamp option

    As a rectification to my last post: 8002955 is a non populated RIAA Amplifier. I successfully tested the population of the components on mine. If you're handy in soldering SMD-components it's a matter of few hours to transform your 8002955 printed circuit into a RIAA-Amplifier. All you have to...
    Posted to Vintage Products (Forum) by nhaggen on Sat, Jan 7 2017
    Filed under: Phono, Beomaster 3500, Beomaster 4500, RIAA Amplifier
  • Re: Beomaster 3500 Frequency display shift

    Hello Before I start the adjustment, the receiver must be in "Test Mode"? Correct? Also it is not clear how to exit this "Test Mode" Thank you for the feedback Alain
    Posted to Vintage Products (Forum) by Traverso on Thu, Nov 14 2013
    Filed under: Beomaster 3500
  • Re: Beomaster 3500 Frequency display shift

    Hello Before I start the adjustment, the receiver must be in "Test Mode"? Correct? Also it is not clear how to exit this "Test Mode" Thank you for the feedback Alain
    Posted to Vintage Products (Forum) by Traverso on Thu, Nov 14 2013
    Filed under: Beomaster 3500
  • Re: Beomaster 3500 cannot key in digit 3 or 4

    OK solved The PCB was not perfectly mounted at the #3 #4 position, some how a bit away y 1 mm from the glass panel. Alain
    Posted to Vintage Products (Forum) by Traverso on Tue, Nov 5 2013
    Filed under: Beomaster 3500
Page 1 of 2 (11 items) 1 2 Next >