I have a generic (that is non-B&O specific) speaker
I have a pair of Fisher XP66 speakers that do not have a
single Fisher component in them. These speakers were a gift from my father when
I was 15 and I would like to keep them…. as a memento.
All speakers plus the cross-over networks were replaced in
the eighties by my McIntosh dealer.
I have two tweeters out and a mid-range and I would like to
replace the four speakers. So how do I go about this and where do I source
Aside from the sentimental aspect of this bookshelf pair,
the replacement Bozak 12” woofers are marvelous, one of my absolute favourites.
I am not trying for a “real” restoration, just get the
mid-range and upper range back.
Since nothing matches, I assume I primarily need to measure
the size of the speakers and go with 8 ohm replacements, as that is what these
So how do I proceed from here?
Keep in mind I am not attempting to make concourse speakers,
just balance the sound quality a bit.
Beogram 4000, Beogram 4002, Beogram 4004, Beogram 8000, Beogram 8002, Bogram 1602. Beogram 4500 CD player, B&O CDX player, Beocord 5000 T4716, Beocord 8004, Beocord 9000. Beomaster 1000, Beomaster 1600, Beomaster 2400.2, Beomaster 2400.2, Beomaster 4400, Beomaster 4500, Beolab 5000, Beomaster 5000, BeoCenter 9000. BeoSound Century, S-45, S-75, S-75, MC 120.2 speakers; B&O Illuminated Sign (with crown & red logo). B&O grey & black Illuminated Sign, B&O black Plexiglas dealer sign, B&O ash tray, B&O (Orrefors) dealer award vase, B&O Beotime Clock. Navy blue B&O baseball cap, B&O T-shirt X2, B&O black ball point pen, B&O Retail Management Binder
Blah blah blah, blah blah ba ran
I have been having an awful time acquiring speakers for my "collection" of B&O receivers.
As such I am using the tattered Fishers from my ill-spent teenage years.
These speakers are technically a mess, Bozak woofers, Scott mid-ranges, Fisher tweeters, and Scott crossover networks. With such a collection of unrelated parts testing for values is all but useless.
My goal is to find replacement speakers for the mid-range and tweeters that simple fit the cabinets to improve the overall sound quality. The Bozak woofers are nothing short of FANTASTIC!
These are the speakers that I use to "balance" the base lacking MC120.2 speakers for my Beolab/Beomaster 5000.
I will check out your much appreciated suggestions this week.
Jeff - Pretty cool that you're hoping to restore these speakers for sentimental reasons.
Along with sourcing the correct size to find the current speaker cabinets without modifications, there are a few other things that you'll probably need to think about as well to select appropriate replacement drivers.
Along with size, you'll want to make sure that the new drivers have the same (or as nearly the same as possible)
Same impedance (4Ohm, 8Ohm, etc)
Same frequency range (80Hz-5KHz or say 2KHz-20Khz, etc.)
Same sensitivity (88db 92db, etc.)
And ideally can produce the same SPL's as the originals.
Assuming that the current drivers have a manufacturer's name on them and part number, it should be pretty easy to look up the details.
In addition to Parts Express, MadiSound is also a great place to find what you're looking for and the folks there can probably help you out as well.
Sounds like a fun project!
Beocenter 9500, Beomaster 6500, Beolab Penta MKII, Beolab 5000, Beolab 3000, Beolab 4000 MKI, Beolab 4000 MKII, Beogram 3300, Beogram 3000, 2X Beolink 7000 RDS, 2X MCP 6500
GregKo:Jeff - Pretty cool that you're hoping to restore these speakers for sentimental reasons.
Sentimental reasons? Well I guess that is a good part of my motivation as I "grew up" with these speakers. The other part is geographical reality, that is to say when you live on an island, as I do (Vancouver Island) it distorts pricing on most everything.
I have been looking for speakers for several years on eBay, but shipping costs or the dreaded "Free pick-up only" stipulation rears its ugly head. But looking locally is all but pointless as folks on this island firmly believe that the "old stuff" they have had collecting dust is now worth a not so small fortune.
Back to these speakers of mine, they started life as Fisher XP66 8 ohm speakers. I had them rebuilt by the local McIntosh dealer that clearly did not see much value in them, so they just popped in whatever would fit and/or what they had laying about the shop.
What I really LOVE about these speakers (fond memories notwithstanding) are the Bozak 12" woofers. Primitive looking puppies but with delicious sounding BASS.
Thank you for the tips which I will explore shortly.
Now if I could just find suitable mid-ranges and tweeters I might really have something. Nothing that would impress a true audiophile, but more than eough to add something positive to my morning routine.