Sign in   |  Join   |  Help
Click here to tell us about your new email address

Beo6 screen half dead

rated by 0 users
This post has 2 Replies | 2 Followers

Griebel
Top 200 Contributor
Posts 267
OFFLINE
Gold Member
Griebel Posted: Thu, Jan 12 2017 1:58 PM

Hi,

I'm using  a Beo6 remote which has started suddenly to act weirdly when touching the screen. The upper half commands on the screen became unresponsive.

- Turned OFF/ON,  didn't help

- Serialized again via the ConfigTool, same issue

- Restored to initial config, nothing

I then did a touch screen test via the service menu, and compared the outcome with a fully working Beo6. The picture is attached. The red dots indicate the area the screen responded upon touching. As you can see, there a no dots on parts of the upper half screen of the weirdly-responding remote (right), while the red dots of the working remote (left) are distributed equally throughout the screen.

Is this reversible by some means or is the screen just (almost) dead... and I will have no alternative than to replace the screen part (which will cost 350€ just to get the replacement item!)??

Guy


gerard
Top 500 Contributor
Luxembourg
Posts 141
OFFLINE
Bronze Member
gerard replied on Mon, Mar 6 2017 3:28 PM
May be you have a problem like this one:

Here

Griebel
Top 200 Contributor
Posts 267
OFFLINE
Gold Member
Griebel replied on Mon, Mar 6 2017 6:26 PM

Thank you for the suggestion. B&O support said that the screen is dead and I bought a replacement part. Nevertheless, I have another Beo6 remote whose keyboard light no longer works. It's possible that the solution described in the post may solve my backlight issue. Will try...

Page 1 of 1 (3 items) | RSS